Razor blades have been a practical tool for their convenient shaving effect, but what should we do when our trusty blade goes blunt? Let’s scroll through the surefire 11-step guide on how to clean a clogged razor blade below for tips to revive your razor to its former glory!
How To Clean A Clogged Razor Blade
Step 1: Wipe Off Debris & Grimes
Your razor is likely full of grimes from previous uses, so a great way to start tackling this problem is to remove the debris residing in the blades. Take off the cleaver and submerge the razor’s head underwater for a while. You should make sure that the water reaches the back of the razor’s head to wash out the buildup down there.
If you want to tackle the back region head-on, you can also use the strongest water sprayer to blast the grimes off. Don’t worry about not being entirely accurate since the pressure from the sprayer should be able to knock everything off its root.
Taking apart the razor lets you in on the filth behind it!
Another good tip is using hot water to ease the grimes! Try this method if the ones above seem hopeless to you.
Step 2: Brush The Rest Of The Filths
If the sprinter cannot take everything off, grab your small-tipped brush and work it out! The bristles of your brush should be able to get into awkward corners that your fingers cannot.
You might want to get yourself a proper razor brush as it is the most suitable tool for the job. However, if there are no bristled tools, an old toothbrush will do the job just fine!
Step 3: Let The Razor Blade Dry Completely
When your razor blades are fresh and damp, it catches dirt, dust and grimes much easier. Letting it dry completely allows it to stay clean for way longer or more uses. If capable, you should get an extra blade. In case you want to shave and your original one is still on the window sill.
Don’t let your blades stay in the sun for too long, though. Putting your blades under the sun for too long makes them suffer from extreme heat, and therefore creating more moisture in the process. That much wet will rust the blades, lowering their quality and potentially expose you to tetanus and skin infection.
Step 4: Sterilize The Blade
Simply wiping the blade and telling that it’s clear just by looking at it is not enough. All those grimes have likely left various bacteria and other microorganisms that you will not want on any sensitive patch of your skin. Then, to keep your blades in function for longer, you should sterilize them!
This opportunity is where your bottle of pure alcohol comes into use, as any alcohol and alcohol-related substance can destroy bacteria. If you do not want booze in the cleaning process, white vinegar is your potential alternative option.
Your razors will need to be sterilized.
You can just let the blades swim in the liquid mentioned above for 5-10 minutes before using. This method is also helpful for razors that are not in use for a while. By soaking them in these liquids for about 5 minutes, they’re ready for your usage.
Step 5: Put The Razor In The Dishwasher
If you don’t trust your own hands to clean anything thoroughly in this day and age, you can do what everyone has been doing in the 4.0 technical era: Let the machine do its job! Specifically, you can try using the silverware section of your dishwashing machine for this task.
This tip is quite a hack if you have been piling up your razors and you’re too lazy to wash them individually.
Step 6: Maintain That Cleanliness
Try to keep the habit of rinsing your razor after every shave allows your razor to stay clean for further usages and requires less frequent deep cleaning. Manufacturers say that one quick rinse after each use and one thorough cleaning routine after each week is good enough.
Keep in mind that maintaining your blades’ hygiene also prolongs its shelf life. If you are deathly tired of buying new blades every two weeks, this is the fitting solution for you!
Step 7: Store Your Razor Carefully
There are only two criteria for blade placement: safety and hygiene.
Don’t leave your blades somewhere it can fall off often and damage themselves. No one likes dented blades, and you will not want to get something on the floor anywhere near your face.
The cleanliness of the space is just as important as the razors.
After cleaning your blades carefully, you shouldn’t place them somewhere they can gather dust and mud. A lined cupboard, a shelf at a high place to avoid humidity and dirt particles, and any places like that should suffice.
Step 8: Replace Rusty Or Dysfunctional Blades
When your blades are no longer functional (broken, rusty, dented, bent, etc.), you should consider letting other blades in your pantry have a chance to shine. Using unsuitable blades can give you unwanted diseases and infections!
Step 9: Buy New Blades
If all of your backup razor blades are not up to the challenge, toss them out and buy a new set! There is no good at keeping and hoarding your used one, especially when they are no longer in their original form and remain their proper function.
Don’t be afraid to buy new replacements!
Step 10: Deep Clean The Razor
As we have mentioned before, you might want to give your razor a deep cleanse with the process given above every week or so to maintain its quality. You will have to take apart the razor when the situation calls for such length, but that is necessary.
Verdict
That is all the steps you need to know on how to clean a clogged razor blade! If you keep your blades well-maintained, you can keep using them for quite a while, so try not to skip the steps. Now, stop staring at your dear razors, save your time, and rescue them!
Further reading: